Photos: Fox · supplied retailer imagery
Terminal tackle · Pellet pegs · Our take
Fox Edges Pellet Pegs
Available in 11 mm, 13 mm and 21 mm sizes
Trying to keep trout and halibut pellets on the hair? Fox Edges Pellet Pegs give you a neat, low-visibility anchor that helps stop hookbaits flying off or getting wrecked by nuisance fish.
- Designed for trout and halibut pellets on a hair rig.
- Available in 11 mm, 13 mm and 21 mm sizes.
- Can be fitted across the pellet end or crossways through its centre.
- Designed for use with a 1.5 mm Nut/Pellet Drill.
Make sure it’s the right one. This review covers the Fox Edges Pellet Pegs, designed for securing trout and halibut pellets on a hair rig.
Tackle Index Score
Tackle Index score
A focused, sensible accessory that earns its place when pellet hookbaits are getting wrecked or pulled off.
- Product Quality8.8/10
- Performance9/10
- Impact on Fish Catching8.6/10
- Ease of Use8.1/10
- Value for Money8.9/10
If you buy through our links, we might get a small kickback, but it won’t cost you a penny extra. As an Amazon Associate I earn from qualifying purchases. The full story
Who it suits
Is it right for you?
Great for
- Pellet anglers fishing a hair rig. The pegs give drilled trout or halibut pellets a more secure anchor for casting and fishing.
- Anglers dealing with nuisance small fish. The peg helps stop the hair stop being dislodged and keeps the hookbait usable for longer.
Maybe skip if
- Anglers mainly fishing boilies or wafters. These are a specialist pellet accessory and won’t add much to standard boilie rigs.
- Anyone who doesn’t want to drill hookbaits. The system relies on making a neat 1.5 mm hole before the peg goes in.
The lowdown
Introducing the Fox Edges Pellet Pegs
Trying to keep trout and halibut pellets on the hair? Fox Edges Pellet Pegs give you a neat, low-visibility anchor that helps stop hookbaits flying off or getting wrecked by nuisance fish.
- Designed for trout and halibut pellets on a hair rig.
- Available in 11 mm, 13 mm and 21 mm sizes.
- Can be fitted across the pellet end or crossways through its centre.
- Designed for use with a 1.5 mm Nut/Pellet Drill.
Quick verdict
Verdict
A simple bit of terminal tackle that solves a proper pain: pellets splitting, slipping or pulling off the hair. The clear finish keeps things tidy, while the shaped peg gives the hookbait something solid to bite into.
They’re especially handy when you’re fishing hard pellets over a longer spell or dealing with small fish having a proper chew. Not flashy, but very useful kit and a cracking addition to a pellet-fishing box.
A focused, sensible accessory that earns its place when pellet hookbaits are getting wrecked or pulled off.
- Product Quality
- 8.8/10
- Performance
- 9/10
- Impact on Fish Catching
- 8.6/10
- Ease of Use
- 8.1/10
- Value for Money
- 8.9/10
The shaped, clear pegs are purpose-built for a common pellet-rig problem and offer a tidy solution.
They’re designed to anchor the hair securely while helping the pellet stay usable as it softens.
They don’t attract fish themselves, but they can keep the hookbait presented properly for longer.
Fitting is straightforward once you have the correct 1.5 mm drill, though drilling adds an extra step.
The smaller sizes offer generous quantities, making them a sensible buy for regular pellet anglers.
Head to head
How it stacks up
Side by side with the closest kit we've reviewed. This updates as we add more reviews.
Fox
Fox Edges Pellet Pegs (this one)
Top scorer
Top scorer
Scores are our own, out of 10. Best in each row is in green. Prices change, so check the latest before you buy.
The full rundown
Everything you'll want to know about the Fox Edges Pellet Pegs
Pellets are brilliant hookbaits when the fish are having it. They’re cheap, natural-looking and bang on for loads of commercial carp and coarse venues. The catch? They can be a right pain to keep on the hair. Drill one badly, cast it too hard or let small fish have a chew and the whole lot can come adrift. That’s where Fox Edges Pellet Pegs earn their keep.
These little clear pegs are designed for trout and halibut pellets on a hair rig. Rather than relying on a small hair stop to hold everything together, the peg gives the bait a proper anchor. The hair stays linked to something inside the pellet, making the presentation more dependable when you’re fishing at range, clipping up or simply trying to get through a busy bite-time.
The idea is nice and simple. Use a 1.5 mm Nut/Pellet Drill to make the hole, then fit the peg into the pellet. It can go across the end of the bait or crossways through the centre, depending on the shape of your pellet and how you want the hair sitting. That gives you a bit of flexibility when tying rigs for different hookbaits.
The shaped design is meant to hold securely as the pellet softens in the water. That matters because a pellet can look spot on when it hits the lake, then gradually swell and weaken. A standard hair stop may pull through once the bait gets soft. The Pellet Peg gives the hair a broader, more dependable anchor point, so your hookbait has a better chance of staying where it should.
There’s another useful little trick here too. The peg plugs the drilled hole, helping stop water soaking straight into the centre of the pellet. It won’t turn a soft pellet into a boilie, obviously, but it can help keep the hookbait hard and usable for longer. That’s dead handy when you want a bait to sit out without turning into mush before a carp has even had a proper look.
The clear colour is also a sensible touch. Trout and halibut pellets are usually fairly plain, so a bright or chunky fixing could look a bit naff. These are designed to blend in rather than shout, keeping the business end of the rig neat. You’re still presenting a pellet with a hook nearby, but there’s less unnecessary tackle on show around the bait.
They should be particularly useful when silverfish, small carp or other nuisance fish are on the munch. Tiny mouths can pull at the hair, shift a normal stop or generally make a mess of your carefully tied rig. A secure peg won’t stop every bit of attention, but it helps prevent the hair stop itself being dislodged and gives the pellet more staying power.
There are three sizes in the range: 11 mm, 13 mm and 21 mm. That covers a useful spread of pellet hookbaits, from smaller options for a tidy commercial-water presentation through to a bigger pellet when you’re after a proper lump. Match the peg to the bait and don’t try to bully the wrong size into place. The pack counts vary, with loads of the smaller pegs and fewer of the larger ones.
The main thing to remember is that these are a specialist tool, not a magic fix for every hair rig. You need the right drill, a clean hole and a bit of care when inserting the peg. Get that bit right and they’re a cracking way to reduce bait loss, cut down the faff and keep your pellet fishing ticking along when the rods are off.
Specifications
The nuts and bolts
- Use
- Securing trout and halibut pellets on a hair rig
- Sizes
- 11 mm, 13 mm and 21 mm
- Pack sizes
- 11 mm: 180 pegs; 13 mm: 134 pegs; 21 mm: 50 pegs
- Colour
- Clear, designed to blend with trout and halibut pellets
- Drill requirement
- Fits a hole made with a 1.5 mm Nut/Pellet Drill
- Fitting options
- Across the end of a pellet or crossways through its centre
Specs checked with Fox, Oct 2026.
Spot a model or spec change?
Our take
A small peg that keeps your pellet fishing less faffy
Fox’s Pellet Pegs are all about making drilled pellets more reliable. Fit one through the pellet and the hair has a much better anchor point, so casting and nuisance fish are less likely to ruin the presentation.
The choice of sizes covers the common pellet hookbait options, and the clear colouring keeps the terminal end of the rig discreet. They won’t transform a duff swim, but they can stop a good bait from becoming a soggy blank-saving opportunity lost.
A simple bit of kit with a proper job
What you’re buying
Fox Edges Pellet Pegs are small, clear anchors for drilled trout and halibut pellets. The hair attaches through the peg, rather than relying solely on a conventional hair stop at the end of the bait. That spreads the load inside the pellet and helps reduce the chance of the hair pulling through during a cast or as the bait softens.
You can fit the peg across the end of the pellet or crossways through its centre. Use a 1.5 mm Nut/Pellet Drill to make the hole, then push the peg in neatly. The peg also plugs that hole, helping limit water soaking into the pellet and keeping the hookbait usable for longer.
Worth knowing. Don’t force the peg into a rough or oversized hole. A clean drill and gentle pressure give you the best chance of keeping the pellet intact, especially when you’re working with softer hookbaits.
Useful when pellets are doing the business
Who it suits
These are bang on for commercial carp anglers, method feeder anglers using a hair rig, and anyone fishing pellets over a bed of loose feed. They’re also useful when small fish are picking at the hookbait and shifting a normal hair stop. A more secure anchor means fewer robbed hookbaits and less re-casting for no reason.
Choose the size to match the pellet you’re using: 11 mm, 13 mm or 21 mm. The smaller packs contain more pegs, while the 21 mm pack has fewer because it’s aimed at larger hookbaits. Keep the appropriate size with your pellet box and you’ll avoid a last-minute tackle-shop dash.
Worth knowing. If you’re fishing a soft pellet close in, don’t overwork the bait. Drill it cleanly, insert the peg carefully and avoid squeezing it while tying up. A little care here saves a load of faff later.
The stuff you’ll want to know
FAQs in full
Can they be used without drilling? No. These pegs are designed to fit into a hole made with a 1.5 mm Nut/Pellet Drill. The drilling step is part of the system and helps create the secure anchor point.
Will they stop every pellet coming off? Nothing can promise that, especially with very soft pellets or rough handling. But they’re designed to help stop the hair pulling through and to keep the bait together better as it softens.
Are they visible? They use a low-visibility clear colouring designed to match trout and halibut pellets. That keeps the presentation tidy, particularly when you’re fishing a short hooklink and the fish are having a proper look.
On paper
Pros & cons
What we like
- Helps stop the hair pulling through during casting and fishing.
- Clear, low-visibility finish is a tidy match for pellet hookbaits.
- The peg plugs the drilled hole, helping slow water soaking into the pellet.
- Useful against small fish that can dislodge a normal hair stop.
Worth knowing
- You’ll need a 1.5 mm Nut/Pellet Drill to prepare the pellet properly.
- They’re specialised for drilled pellet hookbaits rather than general boilie or corn use.
- Soft pellets can still break up if over-drilled or handled too heavily.
Want one?
Add it to your Wanted list or join a Group Buy — shops see anonymous totals only.
Your questions answered
What anglers want to know
The stuff you’d ask your mate on the next peg. Straight answers, no waffle.
01How do you fit Fox Edges Pellet Pegs?
How do you fit Fox Edges Pellet Pegs?
Drill a 1.5 mm hole in the trout or halibut pellet, then push the peg into the hole with the hair positioned as required. It can sit across the end of the pellet or crossways through the centre.
02What do Pellet Pegs actually do?
What do Pellet Pegs actually do?
They provide a secure anchor for the hair, helping stop it pulling through when you cast or when the pellet softens. The peg also plugs the drilled hole, helping reduce water soaking into the bait.
03Which size should I choose?
Which size should I choose?
Match the peg to the size of pellet you’re using. The range covers 11 mm, 13 mm and 21 mm hookbaits, so pick the size that suits your chosen pellet rather than forcing a tiny peg into a big bait.
What anglers say
The word from the bank
Our read: verdict. The strongest reasons to choose it are helps stop the hair pulling through during casting and fishing. and clear, low-visibility finish is a tidy match for pellet hookbaits.; the main trade-off is you’ll need a 1.5 mm nut/pellet drill to prepare the pellet properly..
Our take on the feedback
Why it appeals
Checked Sept '26 — “Helps stop the hair pulling through during casting and fishing.”
Best fit
Checked Sept '26 — “Pellet anglers fishing a hair rig: The pegs give drilled trout or halibut pellets a more secure anchor for casting and fishing.”
Worth knowing
Checked Sept '26 — “You’ll need a 1.5 mm Nut/Pellet Drill to prepare the pellet properly.”
Tackle Index’s take from the product details and fishing fit we checked. We haven’t found enough independent public feedback to call this an angler consensus yet.
Angler score
What our readers rate Fox Edges Pellet Pegs
No angler score yet — nobody's reviewed Fox Edges Pellet Pegs here. Be the first and get the score started.
Owner reports
Own this? Help the next angler.
Quick multiple-choice reports from people who say they own the Fox Edges Pellet Pegs. Not verified purchases, and kept separate from our score.
No owner reports yet.
Alternatives & go-withs
