Photos: Fox Rage · supplied retailer imagery
Predator tackle · Paternoster rigs · Our take
Fox Rage Predator Paternoster Rig
FRR029
A pre-tied 40lb wire paternoster rig that keeps the faff down when you’re chucking deadbaits or livebaits for pike.
- 60cm pre-tied paternoster rig for predator fishing
- Made from 49-strand coated steel wire with a 40lb breaking strain
- Includes a large swivel for the mainline and a large quick-change clip for trace attachment
- Listed RRP is £5.49 and it comes in eco-friendly cardboard packaging
Make sure it’s the right one. This review covers the Fox Rage Predator Paternoster Rig, product code FRR029, supplied as a 60cm pre-tied rig.
Tackle Index Score
Tackle Index score
A practical, fairly priced pre-tied predator rig that keeps paternoster fishing simple.
- Product Quality8.8/10
- Performance8.8/10
- Impact on Fish Catching8.6/10
- Ease of Use9.6/10
- Value for Money8.9/10
If you buy through our links, we might get a small kickback, but it won’t cost you a penny extra. As an Amazon Associate I earn from qualifying purchases. The full story
Who it suits
Is it right for you?
Great for
- Pike anglers fishing deadbaits or livebaits off the bottom. The paternoster arrangement keeps the bait presented above the lead while the coated wire helps protect against sharp teeth.
- Anglers who want quick, tidy rig changes. The pre-tied uptrace, large swivel and quick-change clip cut out a fair bit of fiddly wire work.
Maybe skip if
- Rig tinkerers who like building every component from scratch. The 60cm ready-made format gives you less control over every measurement and connection.
- Anglers fishing methods that don’t need a paternoster. If you’re mainly using float tactics or a different bottom rig, much of this setup won’t be doing much for you.
The lowdown
Introducing the Fox Rage Predator Paternoster Rig
A pre-tied 40lb wire paternoster rig that keeps the faff down when you’re chucking deadbaits or livebaits for pike.
- 60cm pre-tied paternoster rig for predator fishing
- Made from 49-strand coated steel wire with a 40lb breaking strain
- Includes a large swivel for the mainline and a large quick-change clip for trace attachment
- Listed RRP is £5.49 and it comes in eco-friendly cardboard packaging
Quick verdict
Verdict
A proper handy pre-tied option for pike anglers who want a paternoster rig without messing about tying wire trace components at the bank.
The 40lb 49-strand coated steel wire, large mainline swivel and quick-change trace clip make it straightforward, practical kit. At the listed £5.49 RRP, it looks bob on for keeping a spare or two in the box.
A practical, fairly priced pre-tied predator rig that keeps paternoster fishing simple.
- Product Quality
- 8.8/10
- Performance
- 8.8/10
- Impact on Fish Catching
- 8.6/10
- Ease of Use
- 9.6/10
- Value for Money
- 8.9/10
49-strand coated steel wire, a 40lb breaking strain and substantial connection points give it a reassuringly purposeful build.
The 60cm paternoster format and pre-tied uptrace should deliver a tidy, repeatable bait presentation.
It helps you present baits off the bottom and reduces bite-off risk, though the rig can’t compensate for poor bait placement or a badly chosen swim.
The ready-made uptrace, large swivel and quick-change clip keep assembly quick and straightforward.
At the listed £5.49 RRP, it’s a sensible spend for a ready-tied rig that saves time and wire-work hassle.
Head to head
How it stacks up
Side by side with the closest kit we've reviewed. This updates as we add more reviews.
Fox Rage
Fox Rage Predator Paternoster Rig (this one)
Top scorer
Top scorer
Scores are our own, out of 10. Best in each row is in green. Prices change, so check the latest before you buy.
The full rundown
Everything you'll want to know about the Fox Rage Predator Paternoster Rig
Paternoster fishing for pike is one of those cracking methods that can look a bit complicated when you first see all the bits hanging below the rod tip. Lead down below, bait up above, wire doing the important anti-bite-off job. The Fox Rage Predator Paternoster Rig takes away a fair chunk of the fiddling and gives you a ready-made starting point for the bank.
This is the FRR029, a 60cm pre-tied rig made from 49-strand coated steel wire. It’s built around the paternoster idea, with the bait held away from the bottom while the lead anchors the presentation. That can be bang on when you want a deadbait or livebait sitting clear of weed, silt or a messy lakebed.
The main reason for using steel wire in a pike setup is obvious enough: teeth. Pike are absolute units when it comes to slicing through ordinary nylon and braid, so a proper bite-off-resistant trace component is essential. This rig has a 40lb breaking strain and a stealthy camo finish, giving it a sensible balance of strength and low-key appearance.
At the top, you get a large swivel for attaching the rig to your mainline. That’s dead handy when you’re putting the setup together in cold weather, wearing gloves or trying to get sorted before the bite-time disappears. It also gives the rig a clean connection point that should help it behave properly when the lead is holding bottom.
There’s also a large quick-change clip for attaching your trace. That means you can change the trace component without dismantling the whole paternoster arrangement. Handy if you want to switch bait presentation, replace a marked trace or simply get a fresh rig clipped on after a snaggy chuck. Less faff is always welcome when the rods are off.
The uptrace component comes pre-tied, which is the big selling point here. Tying coated wire neatly takes a bit of patience, especially if you’re trying to get consistent crimps or connections in a chilly bivvy. With this rig, you can keep the wire work at home and spend your time sorting the bait, lead system and rod instead.
The 60cm length is a useful middle-ground size for a lot of predator situations. It gives the bait room to sit clear of the lead without becoming ridiculously long and awkward to cast. You may still want a different length for a particular depth, weedbed or current, but for general paternoster work it’s a practical place to start.
In use, think of this as one part of the full system rather than a magic all-in-one pike rig. You’ll still need suitable mainline, a sensible lead arrangement, an appropriate trace and a secure bait presentation. Match those bits properly and this Fox Rage rig offers a tidy, repeatable way to get a bait working off the deck.
The listed RRP is £5.49, which feels fair for a ready-tied predator component that saves time and uses coated 49-strand wire. Keep a couple in the tackle box for a cheeky emergency change and you’ll avoid having to tie wire from scratch when the weather turns and a lump starts showing on the spot.
One thing to remember: pre-tied doesn’t mean fit-and-forget forever. Give the wire, swivel and clip a proper once-over before fishing, and again after a fish, snag or rough landing net job. If the coating is damaged or a connection looks dodgy, bin it and get a fresh one. Pike deserve that level of care, mate.
Specifications
The nuts and bolts
- Product code
- FRR029
- Rig length
- 60cm
- Breaking strain
- 40lb
- Wire material
- 49-strand coated steel wire
- Rig style
- Pre-tied paternoster rig with uptrace component
- Connections
- Large mainline swivel and large quick-change trace clip
Specs checked with Fox Rage, Oct 2026.
Spot a model or spec change?
Our take
The angle
This is all about making a paternoster setup quicker and less faffy. You get the uptrace component pre-tied, plus the connection points needed to attach it to your mainline and trace.
It won’t magically find the pike for you, but it does give you a tidy bite-off-resistant starting point when fishing deadbaits or livebaits off the bottom.
What you’re buying
A neat, pre-tied paternoster starting point
The FRR029 is a 60cm paternoster rig built with 49-strand coated steel wire and a 40lb breaking strain. The stealthy camo finish keeps things discreet, while the pre-tied uptrace means you’re not sat on the bank wrestling with wire and crimps.
A large swivel gives you the mainline attachment point, and a large quick-change clip lets you connect the trace. That makes the rig easy to slot into a broader deadbait or livebait setup, with the lead and bait arrangement chosen to suit the swim.
Worth knowing. The 60cm length is fixed. It’s a useful general-purpose size, but anglers who regularly fish very deep water, heavy weed or unusual presentations may prefer to tie custom paternosters to their own measurements.
Best on the bank
Good for getting fishing quickly
This rig suits predator anglers who want a dependable, low-fuss way into paternoster fishing. It’s especially useful when you’re carrying several rods, changing swims or trying to get a bait out before a short feeding spell passes you by.
It’ll also appeal to newer pike anglers who understand the need for bite-off protection but don’t yet fancy building every wire component themselves. Add suitable mainline, trace, lead and bait tackle, then check every connection carefully before casting.
More experienced anglers can use it as a spare or emergency replacement. Keep one tucked in the box and it could save a session when a trace gets damaged or a rig ends up looking a bit naff after a snag.
Quick answers
The stuff you’ll want to know
Is it only for deadbaits? No. It’s designed for paternoster fishing and can be used with suitable deadbait or livebait presentations, provided the rest of your setup is appropriate and legal for the venue.
Does the rig include everything for a complete pike setup? No. It supplies the pre-tied paternoster uptrace, swivel and quick-change clip, but you’ll need to add the rest of your mainline, lead system, trace and bait components.
What should you check before fishing? Look over the coating, wire, swivel and clip. After a fish or snag, inspect everything again. Any damage means it’s time for a replacement rather than taking a chance on a screaming take.
On paper
Pros & cons
What we like
- Pre-tied, so there’s less wire-twisting faff on the bank
- 40lb coated steel wire helps guard against pike bite-offs
- Large swivel and quick-change clip make connecting the rig simple
- 60cm length suits a broad range of paternoster presentations
- Sensible listed RRP for a ready-made predator rig
Worth knowing
- A fixed 60cm length gives you less freedom than tying your own exact dimensions
- You’ll still need suitable mainline, trace, leads and bait components to complete the setup
- The camo finish is discreet, but checking the wire and connections before fishing remains essential
Want one?
Add it to your Wanted list or join a Group Buy — shops see anonymous totals only.
Your questions answered
What anglers want to know
The stuff you’d ask your mate on the next peg. Straight answers, no waffle.
01What is the Fox Rage Predator Paternoster Rig used for?
What is the Fox Rage Predator Paternoster Rig used for?
It’s designed for paternoster fishing for predators, particularly when presenting a deadbait or livebait above the bottom. The pre-tied uptrace helps make the setup quicker to assemble.
02Is the wire suitable for pike fishing?
Is the wire suitable for pike fishing?
The rig uses 49-strand coated steel wire with a 40lb breaking strain, giving you a bite-off-resistant connection for pike fishing. Always inspect the wire, knots and clips before use and replace anything damaged.
03How do you attach the Fox Rage Paternoster Rig?
How do you attach the Fox Rage Paternoster Rig?
Use the large swivel to connect the rig to your mainline, then attach your trace through the large quick-change clip. Add the rest of your suitable predator terminal tackle and bait presentation to match the swim and conditions.
What anglers say
The word from the bank
Our read: verdict. The strongest reasons to choose it are pre-tied, so there’s less wire-twisting faff on the bank and 40lb coated steel wire helps guard against pike bite-offs; the main trade-off is a fixed 60cm length gives you less freedom than tying your own exact dimensions.
Our take on the feedback
Why it appeals
Checked Sept '26 — “Pre-tied, so there’s less wire-twisting faff on the bank”
Best fit
Checked Sept '26 — “Pike anglers fishing deadbaits or livebaits off the bottom: The paternoster arrangement keeps the bait presented above the lead while the coated wire helps protect against sharp teeth.”
Worth knowing
Checked Sept '26 — “A fixed 60cm length gives you less freedom than tying your own exact dimensions”
Tackle Index’s take from the product details and fishing fit we checked. We haven’t found enough independent public feedback to call this an angler consensus yet.
Angler score
What our readers rate Fox Rage Predator Paternoster Rig
No angler score yet — nobody's reviewed Fox Rage Predator Paternoster Rig here. Be the first and get the score started.
Owner reports
Own this? Help the next angler.
Quick multiple-choice reports from people who say they own the Fox Rage Predator Paternoster Rig. Not verified purchases, and kept separate from our score.
No owner reports yet.
Alternatives & go-withs
