Photos: RidgeMonkey · supplied retailer imagery
Tackle storage · Modular bait buckets · Our take
RidgeMonkey Modular Bucket
Standard (RM032) and XL (RM034)
A cracking bit of bank kit that turns a humble bucket into a proper bait station, with two freezer-safe boxes and a clever bait-waiter setup.
- Available in Standard RM032 and XL RM034 sizes.
- Standard holds approximately 17 litres; XL holds approximately 30 litres.
- Includes two freezer-safe bait boxes with tight-fitting lids.
- Bait boxes can clip onto the sides or be used separately as storage containers.
Make sure it’s the right one. This review covers the RidgeMonkey Modular Bucket in both available sizes: Standard and XL. Capacity and dimensions differ between the two.
Tackle Index Score
Tackle Index score
A practical, flexible bait-storage system that earns its keep through organisation rather than clever nonsense.
- Product Quality9/10
- Performance8.8/10
- Impact on Fish Catching8.1/10
- Ease of Use9.4/10
- Value for Money8.6/10
If you buy through our links, we might get a small kickback, but it won’t cost you a penny extra. As an Amazon Associate I earn from qualifying purchases. The full story
Who it suits
Is it right for you?
Great for
- Carp anglers fishing short sessions. You can keep hookbaits, particles or small feed portions right beside the rods without rummaging through a carryall.
- Feeder and coarse anglers. The separate boxes are dead handy for keeping different hookbaits or feed options organised and ready to swap.
Maybe skip if
- Anglers with very limited storage space. The XL especially has a decent footprint, so it may be a bit much in a packed barrow or tight margin swim.
- Anyone wanting a simple empty bucket only. You’d be paying for the modular boxes and side-mounted setup, which may be overkill if you just need somewhere to carry water.
The lowdown
Introducing the RidgeMonkey Modular Bucket
A cracking bit of bank kit that turns a humble bucket into a proper bait station, with two freezer-safe boxes and a clever bait-waiter setup.
- Available in Standard RM032 and XL RM034 sizes.
- Standard holds approximately 17 litres; XL holds approximately 30 litres.
- Includes two freezer-safe bait boxes with tight-fitting lids.
- Bait boxes can clip onto the sides or be used separately as storage containers.
Quick verdict
Verdict
The RidgeMonkey Modular Bucket is a proper handy bit of kit for keeping bait, feed and small tackle organised on the bank. The two clip-on bait boxes make a lot of sense when you’re fishing close in or chopping and changing baits through the day.
It’s not the fanciest bit of tackle you’ll ever buy, but it’s practical, robust and nicely thought through. Pick the Standard for normal day sessions and lighter loads, or go XL if you’re carrying plenty of feed and don’t mind the bigger footprint.
A practical, flexible bait-storage system that earns its keep through organisation rather than clever nonsense.
- Product Quality
- 9/10
- Performance
- 8.8/10
- Impact on Fish Catching
- 8.1/10
- Ease of Use
- 9.4/10
- Value for Money
- 8.6/10
The robust polypropylene construction, solid bucket format and tight-lidded boxes give it a dependable feel for regular bank use.
The side-mounted boxes make bait access quicker and keep commonly used options organised during a session.
It won’t improve a rig, but quicker bait changes and less rummaging can help you stay ready when the swim comes on.
The boxes clip onto the sides, fit inside for transport and can be used separately, so the setup is simple and flexible.
You’re getting a bucket plus two reusable freezer-safe storage boxes, making the modular design more useful than a basic bucket alone.
Head to head
How it stacks up
Side by side with the closest kit we've reviewed. This updates as we add more reviews.
RidgeMonkey
RidgeMonkey Modular Bucket (this one)
Top scorer
Scores are our own, out of 10. Best in each row is in green. Prices change, so check the latest before you buy.
The full rundown
Everything you'll want to know about the RidgeMonkey Modular Bucket
A bucket is hardly the most exciting bit of tackle, is it? Usually it’s the thing carrying spod mix, pellets, water or a load of damp gear while the rods are off. The RidgeMonkey Modular Bucket gives that humble bit of kit a proper upgrade, adding two removable bait boxes and a much tidier way to organise your session.
There are two versions to choose from. The Standard is the more compact option, measuring 270 x 230 x 280 mm and holding approximately 17 litres. That’s a useful size for day-ticket carp work, margin fishing and general coarse sessions where you want enough capacity without lugging a monster around.
Then there’s the XL, measuring 300 x 270 x 380 mm and holding approximately 30 litres. That extra space will suit anglers carrying more feed, particles or prepared bait. It’ll also be the better shout if you’re setting up for a longer session and don’t want to split everything between several tubs and bags.
Both versions are made from robust 100% polypropylene, so the basic bucket should cope nicely with everyday bank life. Think muddy paths, a packed barrow and the odd knock against a bivvy or bedchair. It’s not trying to be delicate tackle. It’s a workhorse, which is exactly what you want from a bait bucket.
The clever bit is the pair of modular storage trays, or bait boxes, supplied with the bucket. Each one has a tight-fitting lid and can slot onto the bucket sides in a bait-waiter-style arrangement. That puts your most-used baits right where you can reach them, rather than buried under a towel or wedged in the carryall.
That layout should be particularly useful when you’re rotating hookbaits, pellets or small portions of feed. Keep one box for wafters or boilies and another for pellets, corn or chopped bait. On a feeder session, you could separate hookbaits from terminal bits or keep two different options ready for a quick change when the swim goes quiet.
The boxes are freezer-safe too, which adds a bit of welcome flexibility. Prepare some bait at home, keep it portioned up and take it with you without needing a stack of random tubs. Once you’re on the bank, use them attached to the bucket or lift them off and place them beside your seatbox, mat or bait table.
Packing up is where the design earns another little nod. The bait boxes fit inside the bucket when they’re not being used, so you’re not trying to find separate homes for them in the van. They can also be used independently as storage containers, which means they’re useful away from the bucket as well.
There is a comfortable carry handle for shifting the whole lot down to the swim. The Standard looks like the better all-rounder for most anglers, while the XL is the one to grab when capacity matters more than saving every inch of barrow space. Either way, this is a practical bit of kit that cuts down the faff and keeps bait-time nicely under control.
Specifications
The nuts and bolts
- Sizes
- Standard (RM032) and XL (RM034)
- Standard dimensions
- 270 x 230 x 280 mm
- Standard capacity
- Approximately 17 litres
- XL dimensions
- 300 x 270 x 380 mm
- XL capacity
- Approximately 30 litres
- Material and contents
- 100% polypropylene bucket, two freezer-safe lidded bait boxes and carry handle
Specs checked with RidgeMonkey, Oct 2026.
Spot a model or spec change?
Our take
The angle
This is less about reinventing the bucket and more about sorting the faff around it. You get a solid polypropylene bucket, two lidded bait boxes and a bait-waiter-style layout that keeps your hookbaits or feed within easy reach.
The best bit is the flexibility. Use the boxes on the bucket sides, tuck them inside when packing up, or use them independently. That makes it useful for carp, feeder and general coarse work alike.
A bucket with a bit more going on
Closer look
The RidgeMonkey Modular Bucket starts with a robust 100% polypropylene body, then adds two freezer-safe bait boxes with tight-fitting lids. They slot onto the sides in bait-waiter style, giving you quick access to the bits you’re likely to change most often. That’s a much cleaner setup than balancing tubs on a seatbox or digging through a carryall.
When the boxes aren’t needed, they fit inside the bucket. That keeps the kit together during transport and makes the system less awkward in the van. The boxes also work independently, so you’re not locked into one layout. Add the carry handle and you’ve got a straightforward, useful package rather than a bucket that’s all gimmick.
Worth knowing. The Standard is approximately 17 litres, while the XL is approximately 30 litres. Pick based on the amount of bait you normally carry, not just the bigger-is-better instinct. The XL is cracking for bigger loads, but the Standard will be easier to live with in a tight swim.
Where it earns its keep
Who it suits
Carp anglers will get plenty from it when fishing the margins, short sessions or swims where you want everything close at hand. One box can hold hookbaits and the other a small selection of feed. That means less rummaging when a screaming take doesn’t come and you fancy changing the plan.
It also makes sense for feeder and coarse fishing. Keep different hookbait options separate, portion up pellets or store small bits of feed ready for a quick switch. The side-mounted boxes are especially handy when space is limited and you don’t want a full bait table taking over the swim.
Worth knowing. If your fishing involves lots of loose, wet or sticky bait, give the bucket and boxes a proper rinse after the session. The tight lids help keep things contained, but no storage system magically removes the need for a clean-up.
The useful bits before you buy
FAQs in full
Can I use the bait boxes without the bucket? Yes. They can be used independently as storage containers, so they’re handy for hookbaits, pellets, particles or other small tackle jobs around the swim. The side-mounted setup is an option, not a requirement.
Are the bait boxes suitable for frozen bait? Yes, they’re freezer-safe. Their tight-fitting lids make them useful for preparing bait at home and keeping portions organised on the way to the lake. Just make sure anything wet or messy is cleaned out afterwards.
Is the XL always the better buy? Not necessarily. The XL gives you approximately 30 litres, which is bob on for bigger bait loads, but it also takes up more room. For short sessions and normal carp or coarse bait, the approximately 17-litre Standard may be the neater choice.
On paper
Pros & cons
What we like
- Clever bait-waiter layout keeps two containers within easy reach.
- Robust 100% polypropylene construction should shrug off normal bank knocks.
- Freezer-safe bait boxes are useful for prepared baits and spare hookbaits.
- Boxes fit inside the bucket for transport, keeping the whole setup together.
- Comfortable carry handle makes moving bait to the swim straightforward.
Worth knowing
- The XL will take up more room in a cramped bivvy or narrow swim.
- It’s still a bucket, so very wet or messy bait may need a proper clean afterwards.
- The modular setup is most useful when you actually use the side-mounted boxes; otherwise a basic bucket may do the job for less.
Want one?
Add it to your Wanted list or join a Group Buy — shops see anonymous totals only.
Your questions answered
What anglers want to know
The stuff you’d ask your mate on the next peg. Straight answers, no waffle.
01Which RidgeMonkey Modular Bucket size should I choose?
Which RidgeMonkey Modular Bucket size should I choose?
The Standard is the sensible all-rounder at approximately 17 litres, especially for short carp sessions, margin fishing and normal bait loads. The XL holds approximately 30 litres and makes more sense if you carry plenty of feed, particles or several bait options.
02Can the bait boxes go in the freezer?
Can the bait boxes go in the freezer?
Yes. Both included bait boxes are freezer-safe and have tight-fitting lids, making them useful for storing prepared baits or keeping portions organised before you head to the lake.
03Do the bait boxes have to stay attached to the bucket?
Do the bait boxes have to stay attached to the bucket?
No. They slot onto the bucket sides in bait-waiter style, but can also be used independently. When you’re packing up, they fit inside the bucket to keep the whole lot together.
What anglers say
The word from the bank
Our read: verdict. The strongest reasons to choose it are clever bait-waiter layout keeps two containers within easy reach. and robust 100% polypropylene construction should shrug off normal bank knocks.; the main trade-off is the xl will take up more room in a cramped bivvy or narrow swim..
Our take on the feedback
Why it appeals
Checked Sept '26 — “Clever bait-waiter layout keeps two containers within easy reach.”
Best fit
Checked Sept '26 — “Carp anglers fishing short sessions: You can keep hookbaits, particles or small feed portions right beside the rods without rummaging through a carryall.”
Worth knowing
Checked Sept '26 — “The XL will take up more room in a cramped bivvy or narrow swim.”
Tackle Index’s take from the product details and fishing fit we checked. We haven’t found enough independent public feedback to call this an angler consensus yet.
Angler score
What our readers rate RidgeMonkey Modular Bucket
No angler score yet — nobody's reviewed RidgeMonkey Modular Bucket here. Be the first and get the score started.
Owner reports
Own this? Help the next angler.
Quick multiple-choice reports from people who say they own the RidgeMonkey Modular Bucket. Not verified purchases, and kept separate from our score.
No owner reports yet.
Alternatives & go-withs
