Photos: Trakker · supplied retailer imagery
Terminal tackle · Blowback rigs · Our take
Trakker Blowback Rig
Available in barbed, micro-barbed and barbless versions, with multiple hook sizes.
A ready-tied blowback rig with a sharp Clinga BP hook, sensible anti-tangle bits and enough bait flexibility for everyday carp fishing.
- Ready-tied blowback rig supplied in packs of two.
- Built with a razor-sharp Clinga BP hook and 25lb/11.4kg semi-stiff coated hooklink.
- Available in barbed, micro-barbed and barbless variants, plus multiple hook sizes.
- Suitable for bottom baits and balanced presentations, with multi-sized bait stops or extender stops supplied.
Make sure it’s the right one. This review covers the ready-tied Trakker Blowback Rig supplied in packs of two.
Tackle Index Score
Tackle Index score
A tidy, versatile ready-tied rig that earns its keep through convenience and sensible carp-fishing details.
- Product Quality8.8/10
- Performance8.8/10
- Impact on Fish Catching8.6/10
- Ease of Use9.7/10
- Value for Money8.3/10
If you buy through our links, we might get a small kickback, but it won’t cost you a penny extra. As an Amazon Associate I earn from qualifying purchases. The full story
Who it suits
Is it right for you?
Great for
- Anglers who want quick, ready-to-use rigs. The looped end attaches neatly to quick-change systems, so changing rigs after a bite, a blunt point or a snag is nice and speedy.
- Carp anglers fishing bottom baits or balanced hookbaits. The blowback setup, exposed braid and supplied bait-stop options cover both straightforward bottom-bait fishing and lighter balanced presentations.
Maybe skip if
- Rig tinkerers who tie every rig from scratch. You won’t get the same freedom to alter every measurement, material and component position as you would with a rig tied on the bank.
- Anglers needing lots of spare rigs on a tight budget. With two rigs per pack, a busy campaign can soon mean buying a few packs, especially if snags or weed claim the odd one.
The lowdown
Introducing the Trakker Blowback Rig
A ready-tied blowback rig with a sharp Clinga BP hook, sensible anti-tangle bits and enough bait flexibility for everyday carp fishing.
- Ready-tied blowback rig supplied in packs of two.
- Built with a razor-sharp Clinga BP hook and 25lb/11.4kg semi-stiff coated hooklink.
- Available in barbed, micro-barbed and barbless variants, plus multiple hook sizes.
- Suitable for bottom baits and balanced presentations, with multi-sized bait stops or extender stops supplied.
Quick verdict
Verdict
The Trakker Blowback Rig is a proper handy option when you want a reliable blowback presentation without faffing around tying every component yourself. The semi-stiff coated hooklink, exposed braid section and shank-mounted rig ring give it the key features you’d expect from this style of rig.
It won’t replace tying your own rigs if you’re particular about every last angle, but for quick changes, spare rigs and straightforward bottom-bait or balanced presentations, it looks bob on. Pick the right hook size and bait stop, and you’ve got a tidy rig ready to clip on and fish.
A tidy, versatile ready-tied rig that earns its keep through convenience and sensible carp-fishing details.
- Product Quality
- 8.8/10
- Performance
- 8.8/10
- Impact on Fish Catching
- 8.6/10
- Ease of Use
- 9.7/10
- Value for Money
- 8.3/10
The sharp Clinga BP hook, coated hooklink and neatly chosen rig components make this a well-specified ready-tied option.
The exposed braid, Hook Rigger and anti-tangle sleeve are all aimed at a clean, aggressive presentation.
Its blowback layout and bait movement can help create a convincing presentation across common bottom-bait and balanced setups.
It arrives ready tied, includes bait-stop options and attaches quickly through the looped end.
The convenience is strong, although packs of two may feel a little limiting for anglers getting through plenty of rigs.
Head to head
How it stacks up
Side by side with the closest kit we've reviewed. This updates as we add more reviews.
Trakker
Trakker Blowback Rig (this one)
Top scorer
Top scorer
Scores are our own, out of 10. Best in each row is in green. Prices change, so check the latest before you buy.
The full rundown
Everything you'll want to know about the Trakker Blowback Rig
There are days when tying rigs is half the fun. You sit at home with a brew, a decent light and enough bits of coated braid on the table to carpet the living room. Then there are days when the weather’s bang on, the carp are fizzing in the margins and you just want to get a rod clipped up. That’s where the Trakker Blowback Rig comes in.
It’s a ready-tied carp rig built for getting you fishing quickly, without ditching the features that make a blowback presentation so popular. You get a sharp Clinga BP hook, a 25lb/11.4kg semi-stiff coated hooklink and a small rig ring positioned on the hook shank. Nothing too fancy. Just a familiar setup with the important details already sorted.
The exposed braid section is the bit doing much of the clever work. It allows the hookbait to move independently, rather than locking everything into one stiff lump. That can be useful when you’re fishing a bottom bait or a balanced presentation and want the bait to behave naturally as a carp investigates it.
The rig also uses a Hook Rigger to maintain an aggressive hook-point angle. In plain English, that helps keep the hook sitting in a purposeful position rather than flopping about like a bit of old washing line. Add the small Anti-Tangle Sleeve and the whole thing is aimed at a clean, tidy cast with less chance of the rig folding up on itself.
At the business end, you’ve got choice. The Blowback Rig is available in barbed, micro-barbed and barbless versions, along with multiple hook sizes. That matters, mate. A small, delicate hook can be spot on for a neat presentation, while a larger pattern may make more sense when you’re using a bigger bait or fishing over rougher ground. Match the rig to the venue and fish welfare rules.
The supplied bait stops or extender stops add another useful touch. You’re not tied to one hookbait size straight out of the packet. Whether you’re fishing a standard bottom bait or a balanced offering, there’s some flexibility to get the bait sitting where you want it. It’s still worth checking the bait’s balance in the margin before you chuck it out, mind.
The semi-stiff coated hooklink should also help the rig kick away from the lead and behave neatly during the cast. That’s especially handy when you’re fishing at range or dropping onto a firm spot where you want the presentation to settle cleanly. It’s not magic, and no rig can guarantee a tangle-free cast, but the sleeve and coated section are sensible anti-faff features.
The looped end makes attachment quick with a compatible quick-change system. That’s proper handy during a bite-time, after a rough encounter with a snag, or when you’ve landed a lump and want a fresh rig on before the swim goes quiet. You can keep a couple in the tackle box as insurance rather than tying in the dark with cold fingers.
Overall, the Trakker Blowback Rig looks like a practical middle ground. It gives newer carp anglers a straightforward route into a proven style of presentation, while experienced anglers get a tidy spare rig for busy sessions. You’ll still want to inspect the hook point, check the bait stop and make sure the sleeve is positioned properly. Do that, and it’s a cracking little shortcut when the rods are off and you need to get back on the spot.
Specifications
The nuts and bolts
- Rig style
- Ready-tied blowback rig
- Hook
- Razor-sharp Clinga BP hook
- Hooklink
- 25lb/11.4kg semi-stiff coated hooklink
- Presentation
- Bottom baits or balanced hookbaits
- Variants
- Barbed, micro-barbed and barbless; multiple hook sizes
- Pack contents
- Two rigs, with multi-sized bait stops or extender stops
Specs checked with Trakker, Oct 2026.
Spot a model or spec change?
Our take
The angle
This is all about convenience without stripping away the important bits. You get a ready-tied blowback rig built around a razor-sharp Clinga BP hook, a small rig ring on the shank and a Hook Rigger to keep the hook point sitting aggressively.
The exposed braid section lets the hookbait move independently, while the semi-stiff coated hooklink helps the rig kick away from the lead and resist tangling. It’s the sort of setup that makes sense when you want to spend less time at the rig board and more time getting the rods on the spot.
A ready-tied setup with the key bits in place
Closer look
The rig combines a Clinga BP hook with a 25lb/11.4kg semi-stiff coated hooklink. A small rig ring sits on the shank, while the exposed braid section gives the hookbait room to move. That’s the heart of the blowback arrangement: the bait can shift, but the hook remains set up for a positive turn.
The Hook Rigger helps maintain an aggressive hook-point angle, and the small Anti-Tangle Sleeve is there to reduce tangles. At the other end, the loop makes attachment to a quick-change system nice and fast. It’s a compact package with little need for extra faff before casting.
Worth knowing. Always match the hook size and bait stop to the hookbait you’re using. Check the rig in the edge before fishing, especially with a balanced bait, so you know it’s sitting how you want it.
For quick changes and straightforward carp fishing
Who it suits
This rig makes sense for anglers who want to arrive at the lake with a few dependable options already tied. It’s handy for day tickets, short overnighters and sessions where you’d rather spend your time finding the fish, feeding a spot and watching the water than messing around with tiny rig components.
It should suit bottom-bait anglers and anyone using balanced presentations. The different hook sizes and barb options give you a decent spread of choice, but you still need to follow the fishery’s hook rules and choose sensibly for the venue. Keep spare rigs in a rig wallet and you can be back fishing quickly after a lost rig or blunt point.
It’s less compelling for a dedicated rig tinkerer who wants to alter every detail. If you like changing the stripped section, hooklink length, ring position or hook pattern to suit one exact spot, tying your own will give you more control.
The handy bits before you buy
FAQs in full
Can it be used with a quick-change lead system? The looped end is designed for quick attachment to quick-change systems, making it a sensible choice when you want fast rig swaps. Use a suitable sleeve or cover over the connection as needed for your setup.
Is it only for bottom baits? No. It’s suitable for bottom baits and balanced presentations, with multi-sized bait stops or extender stops included to help accommodate different hookbait sizes. Check the finished presentation in the edge before you cast.
How many rigs do you get? The Trakker Blowback Rig is supplied in packs of two. That’s useful as a pair of spares, although regular anglers may want more than one pack for a longer campaign or snaggy venue.
On paper
Pros & cons
What we like
- Ready-tied and quick to attach to a quick-change system.
- Exposed braid section gives the hookbait useful movement.
- Hook Rigger and shank-mounted rig ring create a tidy, aggressive presentation.
- Different hook, barb and bait-stop options make it versatile across common carp rigs.
Worth knowing
- Only two rigs come in a pack, so regular anglers may get through them fairly quickly.
- A pre-tied rig gives you less control than tying your own exact hooklink length and components.
- You still need to choose the hook size and bait stop carefully for the bait you’re using.
Want one?
Add it to your Wanted list or join a Group Buy — shops see anonymous totals only.
Your questions answered
What anglers want to know
The stuff you’d ask your mate on the next peg. Straight answers, no waffle.
01What hookbaits can I use with the Trakker Blowback Rig?
What hookbaits can I use with the Trakker Blowback Rig?
It’s designed for bottom baits and balanced presentations. The supplied multi-sized bait stops or extender stops help you match the rig to different hookbait sizes, so you’ve got room for boilies and other suitable carp baits.
02How does the blowback section work?
How does the blowback section work?
The small rig ring sits on the hook shank, with the hookbait attached so it can move independently from the hook. That movement helps the bait sit naturally while the hook remains ready to turn when a carp mouths the presentation.
03How do I attach the rig to my main setup?
How do I attach the rig to my main setup?
Use the looped end with a compatible quick-change system. Once attached, make sure the anti-tangle sleeve is sitting neatly and check the hook point, bait position and overall presentation before casting.
What anglers say
The word from the bank
Our read: verdict. The strongest reasons to choose it are ready-tied and quick to attach to a quick-change system. and exposed braid section gives the hookbait useful movement.; the main trade-off is only two rigs come in a pack, so regular anglers may get through them fairly quickly..
Our take on the feedback
Why it appeals
Checked Sept '26 — “Ready-tied and quick to attach to a quick-change system.”
Best fit
Checked Sept '26 — “Anglers who want quick, ready-to-use rigs: The looped end attaches neatly to quick-change systems, so changing rigs after a bite, a blunt point or a snag is nice and speedy.”
Worth knowing
Checked Sept '26 — “Only two rigs come in a pack, so regular anglers may get through them fairly quickly.”
Tackle Index’s take from the product details and fishing fit we checked. We haven’t found enough independent public feedback to call this an angler consensus yet.
Angler score
What our readers rate Trakker Blowback Rig
No angler score yet — nobody's reviewed Trakker Blowback Rig here. Be the first and get the score started.
Owner reports
Own this? Help the next angler.
Quick multiple-choice reports from people who say they own the Trakker Blowback Rig. Not verified purchases, and kept separate from our score.
No owner reports yet.
Alternatives & go-withs
